450 Bushmaster Muzzle Brake (45 cal.)

We have engineered and manufactured our own radial style muzzle brake to help mitigate the recoil and muzzle rise of rifles chambered in 450 Bushmaster. This is the same muzzle brake we use on our custom rifles. Made from 416 stainless steel, 12 ports CNC machined at 90 degrees create maximum surface area to redirect the hot gases as the bullet leaves the muzzle. Offered in three different thread sizes. Works great on Bergara B-14 rifles!  

• Available in matte stainless or matte black (Black Nitride coated).
• No gunsmithing required. No crush washer or lock washer needed.
• BERGARA B-14 Ridge: 5/8-24 or 11/16-24 thread
• BERGARA B14 HMR: 11/16-24 thread
• SAVAGE 110: 11/16-24 thread
• RUGER AMERICAN: 5/8-24 or 11/16-24 thread

Length: 1.950″. Diameter: .850″.

No gunsmithing required.

Radial Muzzle Brake Installation Directions

1. Remove the current muzzle device or muzzle cap from the firearm you want to install this muzzle brake to.
2. Apply a light amount of anti-seize/ grease to the threads on the barrel. No crush washer or lock washers are needed.
3. Thread the muzzle brake on to the barrel until hand tight.
4. Place the plastic rod provided through the ports of the brake so the muzzle brake is centered on the rod.
5. Please use the plastic rod provided to tighten the brake to the barrel.
6. Remove the plastic rod from the muzzle brake and the brake is successful installed.

No gunsmithing required.

Dealer pricing and quantities available