350 Legend Muzzle Brake (35 cal.)

We have engineered and manufactured our own radial muzzle brake specifically designed around the 350 Legend. By reducing felt recoil and mitigating muzzle rise, this makes follow through and follow up shots easy. Made from 416 stainless steel, 12 ports CNC machined at 90 degrees create maximum surface area to redirect the hot gases as the bullet leaves the muzzle. The threads are CNC machined to 5/8x24, 9/16x24, or 1/2x28 to fit most rifles chambered in this cartridge. Works great on CVA scout & Cascade rifles!  

• Available in matte stainless or matte black (Black Nitride).
• No gunsmithing required. No crush washer or lock washer needed.
• CVA Scout & CVA Cascade: 5/8x24 thread
• Ruger American: 1/2x28 thread 
• Length: 1.950". Diameter: .800" chamfered to .750" or .725"

Radial Muzzle Brake Installation Directions

1. Remove the current muzzle device or muzzle cap from the firearm you want to install this muzzle brake to.
2. Apply a light amount of anti-seize/ grease to the threads on the barrel. No crush washer or lock washers are needed.
3. Thread the muzzle brake on to the barrel until hand tight.
4. Place the plastic rod provided through the ports of the brake so the muzzle brake is centered on the rod.
5. Please use the plastic rod provided to tighten the brake to the barrel.
6. Remove the plastic rod from the muzzle brake and the brake is successful installed.

No gunsmithing required.

Dealer pricing and quantities available